Deutch
Français
Overview
This tutorial goes over the sound control features of the Cisco IP Phone 8800 Series.
Volume
Press plus or minus on the Volume button to adjust the volume. For example, to adjust the volume of the ringer, from the idle phone, press plus or minus until the desired volume is achieved. The same process can be repeated to adjust the volume for the handset, headset or speaker. When changing the headset volume; note the headset icon in the top right.
Mute
Press “Mute” to mute a call in progress. When the microphone is muted, the button illuminates red. To take a call off mute, press “Mute” again. It’s a good practice to look at the mute key before speaking on a call, to make sure you’re not speaking while muted.
Speaker
Press “Speaker” to use the speakerphone. To take a call off speakerphone, lift the handset, or if you have a headset, press the headset button.
Headset
This key is used to answer and end calls using the headset connected to the phone. The button is lit and the headset icon appears in the top bar when the headset is activated.
